IT Help Desk Portal

1. Connect the included microphone to the 1/4" Mic input. Or to connect an external device such as a phone to play music, using a standard AUX headphone cable, plug into the Line In port. 

2. To power on the speaker, turn the Volume/Power knob. This will power on the speaker. The Power light will light up red. Adjust volume with the same knob. If even more volume is desired, press the red Mic Boost button. 

3. Power on the microphone by flipping the switch on the side of the microphone to On.

4. When you're done, power off the speaker by turning the Volume/Power knob all the way to the left, it will click. 
5. To charge the speaker, plug the included charging cable into DC IN on the speaker, and the plug into a wall outlet. While charging, the Charge light will illuminate red. 


Troubleshooting:

• No sound
  • Turn the power knob clockwise, the Power light should turn on. If not, plug in the speaker to charge, or replace the 10 AA batteries with charged ones. 
  • Make sure the Mic cable is plugged in all the way and that the power switch on the side of the mic is switched to On. 
• Distorted sound
  • Lower speaker volume.
  • Bring the microphone further away from the speaker's mouth.
  • Do not stand within 10 feet directly in front of the speaker with the microphone. This will result in feedback. 
  • Make sure the speaker is fully charged.